150 km in the west of Rennes, close to the French West Coast, Lasco‘s first important French Hay drying project was commissioned in June 2016. The total Hay drying surface for the Dolo family is 800 m2. A bulk drying system increases the variety of its usage, because grain, wood chips or corn can be dried as well.
The special feature of the plant enables drying to be performed in any two of the four boxes. In addition, multiple energy sources are available for the drying system to produce its drying air.

Previous Next Pause The unloading station for the loading wagon is located at the centre of the building and lifted over the Hay boxes. Thus, the distances the Hay crane must move are short and can save time.
A LASCO Hay crane M70 guarantees a fast loading. A fully glazed cabin with air conditioning, radio and filter is provided for the operator’s comfort. Since the cabinets of the new DRYair dehumidifier generation are now located externally, all information can flow together in the technical room. That place also locates a control module for the HB4000. The drying process is automatically regulated by a control unit. Thus, the system decides depending on the outside air quality between convection and hood suction operation and can automatically change the state of the operation by using a flap system.
If the quality of air isn’t sufficient via the hood suction, the system will switch to the circulating air operation activating the dehumidifier as well as the heating coil of the biogas plant.

Photos

[nggallery id=”40″]

Which hay drying is right for you?

An old saying goes: “Many roads lead to Rome”. That is why
an intensive consultation is very important to us. Together with
the customer we coordinate the necessary and possible drying
and provide information about which drying technology
is necessary for this. Because every drying system is different. We offer the
choice between dehumidifiers or LandriTherm hot air heaters.
A combination of both systems is often the right one.
Contact us. We are happy to support you in your project.

Our last news

LASCO’s largest Cone Splitter in action

LASCO’s largest Cone Splitter in action

The reputation precedes that the LASCO cone splitter would split wood as if it were made of cardboard. The cone splitter M12 model shown here is the largest model of its series. There are In total 12 hydraulic motors working in the machine. An intelligent transmission...

read more