LADry
Dehumidifier for drying
LADry dehumidifier
The dehumidifier series stands for more nutrients in the hay, less feeding of concentrates and healthier animals.
The appliance series was developed with decades of know-how from hay drying especially for the harsh agricultural requirements and are manufactured in-house. The proven and installed technology meets general industry standards.
SUBMIT YOUR ENQUIRY NOW WITHOUT OBLIGATION
Advantages:
Product advantages
Compressor
High-quality compressors: powerful and speed-controlled
Frame
- Bolted steel / frame construction
- durable and stable in value
Model range
Large model range. Suitable for small and large businesses.
Heat exchanger
Deep heat exchanger packages for long air retention times (condenser and evaporator from 122 mm to 128 mm) and good heat transfer
Efficiency and performance for a long time
In many years of field tests, a slat spacing of 3 mm has proven to be optimal. The registers can be cleaned very easily. This provides the basis for high heat transfer with optimum dehumidification at the same time. The result: high performance even after a long service life!
Special coating
on the heat exchangers improves water drainage and also protects against oxidation
Maintenance doors
Large service and maintenance doors on both sides
Stainless steel tray
Sensors
Optimized operation thanks to standardized sensors
LADry dehumidifier
Air saturates
The drying air pushes through the hay, saturating it with water.
This cools it down.
Hot air heater
As an alternative or in addition to a dehumidifier, a hot air heater can be used to treat the air.
Dehumidifier
The dehumidifier removes the moisture from the drying air.
The air is also reheated.
Drying fan
The fan forces the drying air through the crop
| Article no: | Model | Connected load | Operating current | Box area | Air volume² (m³/s) | Dimensions (lxtxh) |
|---|---|---|---|---|---|---|
| 130541 | HT 1.7 | approx. 11 kW | max. 16.3 A | 31 - 62 m² | 18,360 Nm³/h | 1687 x 1143 x 1712 mm |
| 130489 | HT 2.2 | approx. 15 kW | max. 21.8 A | 40 - 80 m² | 23,760 Nm³/h | 1687 x 1143 x 2117 mm |
| 130536 | HT 3.3 | approx. 20 kW | max. 39.6 A | 60 - 120 m² | 35,640 Nm³/h | 2257 x 1143 x 2117 mm |
| 130537 | HT 3.8 | approx. 26 kW | max. 44.4 A | 69 - 138 m² | 41,040 Nm³/h | 2257 x 1143 x 2415 mm |
| 130538 | HT 4.5 | approx. 30 kW | max. 44.4 A | 82 - 164 m² | 48,600 Nm³/h | 2497 x 1143 x 2513 mm |
| 130539 | HT 5.5 | approx. 37 kW | max. 52.9 A | 100 - 200 m² | 59,400 Nm³/h | 2997 x 1143 x 2513 mm |
| 130543 | HT 7.6 | approx. 52 kW | max. 71.8 A | 138 - 276 m² | 82,080 Nm³/h | 4500 x 1143 x 2415 mm |
| 130544 | HT 9.0 | approx. 60 kW | max. 88.8 A | 164 - 327 m² | 97,200 Nm³/h | 4980 x 1143 x 2513 mm |
| 130545 | HT 11 | approx. 74 kW | max. 105.8 A | 200 - 400 m² | 118,800 Nm³/h | 5980 x 1143 x 2513 mm |
| 131035 | HT 15.2 | approx. 110 kW | max. 180 A | 280 - 560 m² | 166,320 Nm³/h | 8072 x 1143 x 2513 mm |
Typical mown area (with 2-3 batches per cut) (ha). These figures vary due to different yields per hectare, location and forage stocks. Take advantage of a personal consultation. Source: Hay drying Technical principles for construction planning. ÖKL, 2017 * Addition of dehumidifiers and hot air generators by Lasco.
1) Current limitation possible on a customer-specific basis
2) Nm³/h = standard cubic meters per hour
Subject to technical changes in the interests of further development.
Model overview of dehumidifiers for hay drying
Videos: Hay drying with dehumidifier
Further products
Heat exchanger
