LATherm
PELLETS
Technology for heroes.
Pellet hot air generator
The pellet hot air generator are designed as a container system and are therefore transportable. Equipped with a snap-in daily container or a small pellet silo, heating and drying jobs can be carried out without a great deal of installation work. Set up the hot air generator. Connect the power supply and the hot air hose and start the appliance.
SUBMIT YOUR ENQUIRY NOW WITHOUT OBLIGATION
Fuel: Pellets
Mobile: versatile in use
Very efficient and CO² neutral
Our models.
- LA150P
That’s what’s inside.
High-performance suction system for pellets
Pellet hopper with mounted high-performance turbine to the pellet silo.
Easy to use
The control system for our pellet burners is designed to be as simple as possible and consists of:
- main switch
- on/off switch
- operating light
- warning light
- operating message
- external start/stop
- main switch
- on/off switch
- operating light
- warning light
- operating message
- external start/stop
Controlled (indoor) temperature
Timers or thermostats can be connected via the external start/stop connection. The pellet hot air generator then starts automatically as required.
Functional principle.
Flue gas outlet
Cyclone separator
Hot air blower
Heat exchanger
High heat transition
Combustion chamber
Burning plate
Primary air fan
Ash pan
Underfeed screw
Rotary valve
Forklift pockets
Induced draught fan
Technical data.
| LA150P | |
|---|---|
 | |
| Nominal heat output: | max. 150 kW |
| Fuel heat output: | max. 165 kW |
| Ignition: | automatically |
| Regulation: | automatically |
| Firing: | Burning plate via underfeed supply |
| Power connection: | 380 V - 16A |
| max. intake temperature: | 45°C |
| max. heating at max. air flow rate: | approx. 55°C |
| fuel consumption: | approx. 33 kilos of pellets/h |
| Storage container: | external |
| Weight (net, without fuel): | approx. 1,000 kg |
| Flue gas diameter: | 180 mm |
| Hot air diameter: | 600 mm |
| Construction method: | transportable container |
| Pellets: | EN14961-2 Cat. A1 Plus |
| Air volume output max: | up to 7,500 Bm³/h |
| Recording: | Operating hours counter |
| Thermostat: | Option: external start/stop |
Dimensions.
Pellet silos.
| Silo (m³) | Operating time | A | C | D | E | |
|---|---|---|---|---|---|---|
| SHP Pellet 2 | 2 m³ | approx. 41 h | 2100 mm | - | 1230 mm | - |
| SHP Pellet 8 | 8 m³ | approx. 165 h | 6033 mm | 200 mm | 1915 mm | 2500 mm |
| SHP Pellet 10 | 10 m³ | approx. 210 h | 6278 mm | 300 mm | 2110 mm | 2800 mm |
| SHP Pellet 12 | 12 m³ | approx. 250 h | 6858 mm | 300 mm | 2100 mm | 2800 mm |
| SHP Pellet 15 | 15 m³ | approx. 315 h | 6983 mm | 300 mm | 2360 mm | 3000 mm |
| SHP Pellet 20 | 20 m³ | approx. 420 h | 8145 mm | 400 mm | 2360 mm | 3000 mm |
| SHP Pellet 25 | 25 m³ | approx. 530 h | 9369 mm | 400 mm | 2385 mm | 3000 mm |
| SHP Pellet 31 | 31 m³ | approx. 655 h | 10571 mm | 400 mm | 2385 mm | 3000 mm |
Pellet distributor for a pellet burner
Silo distributor for up to 6 pellet burners
Optimally equipped
Optimally equipped
Insulated hot air hoses
Our insulated hot air hoses have a high-temperature section and can therefore be easily connected to the hot air ovens. The hoses are available in various diameters and lengths.
Hot air hoses
Our hot air hoses are available in a wide range of diameters and lengths. They are pressure-resistant up to XY. The individual hose sections are sewn and not glued.
Stainless steel smoke pipe package
Our stainless steel smoke pipe package is supplied to suit the respective hot air generator type. Installation is simple.
div. Temperature sensor
A useful accessory for all hall, workshop and construction heating systems.
Service that goes further.
If you have any problems with your hot air generator, we are always on hand to help. Our service team will take care of your concerns so that your operation can be resumed quickly and smoothly.
