LATherm
WOOD CHIPS
Technology for heroes.
Wood chip hot air Generator
Our wood chip hot air generators are available in a power range from 150 kW to 750 kW. In contrast to wood log hot air gemerators, wood chip-based models operate fully automatically. They are also designed as fully pre-assembled, ready-to-use systems that can be used flexibly at different locations thanks to their transportability. The integrated wood chip bunker ensures a long-lasting and even heat output. From a nominal heat output of 750 kW, the bunker is installed externally.
SUBMIT YOUR ENQUIRY NOW WITHOUT OBLIGATION
Fuel: Wood chips
Mobile: versatile in use
Very efficient and CO² neutral
Our models.
- LAH90150 / LAH90250
- LA750
LAH90150 and LAH90250 - The devices hardly differ from each other on the outside.
LAH90150 and LAH90250 - The devices hardly differ from each other on the outside.
LAH90150 / LAH90250
Our 150 kW and 250 kW wood chip hot air generator have reached a new evolutionary stage: a completely revised combustion technology ensures extremely low emissions and makes them eligible for subsidies in almost all European countries - without additional filters. Thanks to the new, fully automatic fuel detection system, both ease of use and efficiency are increased, allowing for longer maintenance intervals.
LA750
The LA750 was developed for really large heating and drying ideas and offers all the refinements of modern combustion technology. Just like the smaller models, the LA750 is equipped with all the components, although in this case the storage container has been relocated externally into a transportable container for reasons of transportability and fuel consumption.
That’s what’s inside.
High-performance air heat exchanger
The transport fan draws in fresh air. This is passed through the air heat exchanger. This heats the air, making it 100% emission-free and hygienic.
As there is no transition to water, very high blow-out temperatures are possible.
As there is no transition to water, very high blow-out temperatures are possible.
Roll-off platform with storage container
Our LA750 is supplied via an external fuel tank. In this example, the hot air generator and storage tank have been installed on a roll-off platform.
Touch control
The entire wood chip series is equipped with a modern touch control.
Combustion chamber
A movable stepped grate operates in the combustion chamber.
Functional principle.
Cyclone separator
Heat exchanger
Cold air fan
Heat exchanger cleaning
Ash box
Hot air outlet
Induced draught fan
Water tank
Combustion chamber
Secondary air openings
Level indicator
Step grate
Ash discharge screw
Storage bunker
Discharge screw
Primary air inlet
Technical data.
| LAH90150 | LAH90250 | LA750 | |
|---|---|---|---|
 |  |  | |
| Nominal heat output: | max. 150 kW | max. 240 kW | max. 750 kW |
| Fuel heat output: | max. 160 kW | max. 250 kW | max. 830 kW |
| Ignition: | automatically | automatically | automatically |
| Regulation: | automatically | automatically | automatically |
| Firing: | Step grate firing | Step grate firing | Step grate firing |
| Storage container: | 5,3 m² | 5,3 m² | external container m. Discharge system |
| Power connection: | 400V (3P+N+PE) | 400V (3P+N+PE) | 400V (3P+N+PE) |
| max. intake temperature: | max. 50°C at 150/250 | max. 50°C at 150/250 | max. 50°C at 150/250 |
| max. heating at max. air flow rate: |
Axial blower: 8500 Bm3/h
-> max. 50°C Centrifugal blower: 11500 Bm3/h ->max. 32°C | Axial blower: 8500 Bm3/h -> max. 80°C Centrifugal blower: 11500 Bm3/h -> max. 67°C | 89°C (at 26,000 m3/h) |
| Air volume output max: | max. 11500 Bm3/h Centrifugal blower | max. 11500 Bm3/h Centrifugal blower | 30,000 Bm³/h |
| Weight (net, without fuel): | approx. 2350kg | approx. 2500kg | approx. 4500kg |
| Flue gas diameter: | 200 mm | 200 mm | 250 mm |
| Hot air diameter: | 600 mm | 700 mm, elliptical | 2 x 900 mm |
| Construction method: | transportable all-in container | transportable all-in container | Transportable all-in container, External wood chip storage |
| Wood chip quality: | P16A | P16A | P31S |
| fuel consumption: | approx. 0.2 m³/h | approx. 0.33 m³/h | approx. 1 m³/h |
| Control: | B & R touch display | B & R touch display | B & R touch display |
| Power levels: | 50 % -100 % (infinitely variable) | 50 % -100 % (infinitely variable) | 50 % -100 % (infinitely variable) |
| Options: | Fully automatic fuel selection | Fully automatic fuel selection | Fully automatic fuel selection |
| Recording: | Operating hours counter, power counter | Operating hours counter, power counter | Operating hours counter, power counter |
| Thermostat: | Remote thermostat connection | Remote thermostat connection | Remote thermostat connection |
| other components: |
Cyclone, weekly heating program Mon-Sun, heat metering (calculated value), ash removal, flue gas temperature sensor, combustion chamber sensor |
Cyclone, weekly heating program Mon-Sun, heat metering (calculated value), ash removal, flue gas temperature sensor, combustion chamber sensor |
Multi-cyclone with flue gas recirculation, heating program (Mon-Sun), heat metering (calculated value), ash removal, Lambda |
| Option: |
Remote maintenance (also via cell phone), infinitely variable output control, pressure-stable speed-controlled radial fan, Lambda control, BAFA measurement and logging box, room thermostat for external start/stop, feed hopper |
Remote maintenance (also via cell phone), infinitely variable output control, pressure-stable speed-controlled radial fan, Lambda control, BAFA measurement and logging box, room thermostat for external start/stop, feed hopper |
Remote maintenance (also via cell phone), Stepless power control when temperature probe is connected, Room thermostat for external start/stop |
Dimensions.
Optimally equipped
Optimally equipped
Insulated hot air hoses
Our insulated hot air hoses have a high-temperature section and can therefore be easily connected to the hot air ovens. The hoses are available in various diameters and lengths.
Hot air hoses
Our hot air hoses are available in a wide range of diameters and lengths. They are pressure-resistant up to XY. The individual hose sections are sewn and not glued.
Stainless steel smoke pipe package
Our stainless steel smoke pipe package is supplied to suit the respective hot air generator type. Installation is simple.
div. Temperature sensor
A useful accessory for all hall, workshop and construction heating systems.
LAH90150 / LAH90250 ohne Rauchrohr
LAH90150 / LAH90250 mit Rauchrohr
LA750
LAH90250 im Einsatz
LA750 aufgebaut auf Abrollplattform inkl. Vorratsbehälter
Touch-Steuerung
Service that goes further.
If you have any problems with your hot air generator, we are always on hand to help. Our service team will take care of your concerns so that your operation can be resumed quickly and smoothly.
