LASCO Triskorp - tripple combination
Triscorp S makes it easy to produce firewood from the comfort of an excavator.
Working in the driver‘s cab is not only effortless, but also comfortable.
one device, 3 functions
producing wood effortless and comfortable
work in all weathers
outside the danger zone
Force flow in alignment. Balanced load on the excavator arm minimizes wear.
The sophisticated mounting geometry enables wear-reduced, gentle work for the carrier machine. The torsion forces are as small as possible at the same time.
Due to the small distance between Triscorp and tree trunk, the leverage forces are reduced.
The sophisticated mounting geometry minimizes wear.
|Oil quantity||max. hydraulic pressure||Typical operating weight||Weight||Hydraulic system|
|30 – 150 l/min||170 – 200 bar||from 5,5 to – 15 to||395 kg||1x double-acting 22 L connection 1x electronic switching valve (12 Volt)|
Type: Cone splitter Roli 10.0 K
Length of wood for splitting process:
max 300 cm
max. 100 cm – 110 cm
Type: Harvester saw
up to 14,4 kW at 50,4 l/min
Type: Wood tong LA1200HZ
Opening width: 1200mm
Tongs closing force: 11,6 kN
Cylinder extension force at 200 bar: